Care Wash Maintenance

How to Clean Your Rig After Applying WildWrap

Whether you’re crawling through mud or bushwhacking through brush, your 4x4 is now protected by WildWrap—our self-healing paint protection film (PPF) made for serious off-road use. Now let’s talk about how to clean your rig and keep that protection performing at its best.

This guide is beginner-friendly, even if this is your first time using PPF.

⸻

1. Give It 48 Hours Before Washing

Once WildWrap is applied, let it sit for at least 48 hours before washing. This gives the adhesive time to fully bond and ensures a strong hold—even after rough trail use.

⸻

2. Start With a Rinse

Before touching the paint, rinse off any caked-on mud, grit, or sand using a hose or a pressure washer on a medium or low setting. Work from top to bottom to avoid dragging dirt across the surface.

Pro tip: Avoid spraying high-pressure water directly at the film edges.

⸻

3. Use a Mild Soap + Soft Mitt

Go with a pH-balanced car wash soap and a soft microfiber mitt or sponge. Fill a bucket with soapy water and gently wash the surface using straight-line motions—not circles.

This helps avoid micro-scratches and swirl marks, even though WildWrap’s self-healing film can smooth out light damage over time.

⸻

4. Tackle Trail Gunk Like a Pro

Nature can leave some nasty stuff behind. Here’s how to deal with the most common offenders:
    •    Bird poop: Rinse it off ASAP. If it’s dried, soak a microfiber cloth in warm, soapy water, place it on the spot for a few minutes, then gently wipe.
    •    Bug splatter: Same method—soak and wipe, don’t scrub.
    •    Tree sap: Use warm water and gentle pressure. If it doesn’t come off, wrap your finger in a microfiber towel and slowly work the spot in small motions.

Avoid harsh chemicals or scrubbing pads. They can dull the film or weaken the adhesive.

⸻

5. Rinse & Dry

Once you’re done washing, rinse thoroughly with clean water, then dry using a clean microfiber towel. Pat dry instead of rubbing to avoid unnecessary wear.

⸻

6. Let the Film Heal Itself

WildWrap is self-healing—that means light surface marks and fine scratches from trail brushes or washing can disappear over time, especially with a bit of sun or warm water.

If you notice light swirls or haze, pour warm (not hot) water over the area or leave the vehicle in the sun for a bit. The heat activates the self-healing layer.

⸻

7. Skip Waxes & Sealants (for now)

Some products can interfere with WildWrap’s self-healing and finish. For now, avoid waxes, ceramic sprays, or tire shine overspray on the film until we offer approved care products.

⸻

Coming Soon: WildWrap Cleaning Kit

We’re working on a full WildWrap Cleaning & Care Kit designed specifically for off-road PPF. It’ll include a gentle soap, soft microfiber cloths, and everything you need to clean and maintain your film safely.

Stay tuned—it’s coming soon!

⸻

Quick Cleaning Tips at a Glance:
    •    Rinse before washing
    •    Use pH-neutral soap + microfiber mitt
    •    Spot-clean bird poop, bugs, and sap ASAP
    •    Let sun or warm water heal light swirls
    •    Avoid automatic car washes with brushes